Our Airgineers Can Help You Select The Right Product!
Contact Us
Blasting propels abrasive media at high pressure, and moisture can make the media clump or lose its abrasive properties. Effective moisture control during blasting helps the media perform as intended.
Any further cooling causes condensation and water droplets on cold surfaces. This moisture can react with inorganic materials or help substances degrade the blasted surface, so dew point humidity control protects the process.
Across most of India, RH varies between 60-90% at 85°F-100°F. The long-term effects on mechanized industry are devastating and cost companies thousands of rupees in maintenance each year.
The critical humidity is about 45%, but in practice RH for steel component storage humidity should not exceed 40%.
Heated air needs the equipment heated to the same temperature, or condensation starts on cooler metal. Heavy equipment takes a long to heat, so it goes unprotected meanwhile, which is why dehumidifying is preferred for relative humidity control machinery needs.
Bry-Air offers a simple, economical solution, and its desiccant dehumidifiers absorb moisture from the air. Associated Bearing holds 45% RH at 37.5°C±1°C in its bearing storage room using a 600 cfm capacity.
Our Airgineers Can Help You Select The Right Product!
Contact Us
Uncontrolled humidity during blasting causes condensation on cold surfaces. This condensed moisture reacts with certain inorganic materials or acts as a medium conducive for substances to attack materials.
Let's
Get In
Touch