Our Airgineers Can Help You Select The Right Product!
Contact Us
Bridges are constantly exposed to moisture and salts from nearby water bodies and the air. In concrete bridges, moisture acts as an electrolyte that corrodes steel reinforcement, which is why bridge corrosion prevention matters for structural integrity.
Regular exposure to the external environment causes oxidation and corrosion, shorter service life, reduced vehicle loading capacity and higher life cycle cost. Unchecked corrosion can lead to costly repairs, safety hazards or structural failure.
Moisture in the air contacts ferrous metals such as iron and steel used in construction, triggering a chemical reaction that causes rust. This is why moisture must be controlled around steel components.
RH should be kept below 40%, with a dew point of -10°C at ambient temperature. This level of dew point corrosion control helps keep the corrosion rate very low.
Small air gaps between bundled steel wires are continuously fed with dehumidified air, and anchorage rooms are dehumidified to 40% RH. Booster fans maintain airflow, which supports suspension bridge cable protection at the anchorages.
Bry-Air desiccant dehumidifiers maintain a dew point as low as -60°C regardless of ambient conditions. This makes them well suited to preventing corrosion in bridges, including girder bridges where relative humidity inside chambers falls to about 35%.
Our Airgineers Can Help You Select The Right Product!
Contact Us
Uncontrolled humidity in bridges lead to oxidation, corrosion, reduced capacity, and increased costs. Moisture during the construction of bridges cause rust in ferrous metals.
Let's
Get In
Touch