Bry-Air Control Room Air Purifier
Honeycomb filter based gas phase filtration system (ranging from 500 CFM to 2000 CFM)
Our Airgineers Can Help You Select The Right Product!
Contact Us
Honeycomb filter based gas phase filtration system (ranging from 500 CFM to 2000 CFM)
Our Airgineers Can Help You Select The Right Product!
Contact Us
Advanced Honeycomb Chemical Filter
Self-Contained and Portable
Energy Efficient Design
Easy Maintenance and Servicing
Bry-Air’s Control Room Industrial Air Purifier is a custom-designed solution for control rooms to shield electronic equipment from the threat of electronic corrosion and abrupt failures. It is caused by corrosive gases and particulate contaminants that seep into the control rooms.
Corrosive gases such as NOx, SOx, Cl2, NH3, O3, HF, H2S, VOCs and particulate contaminants such as PM10, PM5 are either generated in-house (within the plant) or emerging from the nearby industrial areas, landfill sites and open drains and seep into critical control rooms.
Bry-Air Control Room Air Purifier houses a revolutionary Honeycomb Chemical Filter which is the heart of the system. This next-generation revolutionary new medium is a building block of our new custom-designed solution for data centres.
Bry-Air Control Room Air Purifier is manufactured to the highest quality, reliability and ecological standards to control damage. It is a self-contained, standalone, movable unit that purifies and re-circulates the air in an enclosed space.
Bry-Air Data Control Room Air Purifier works in three stages. At stage I, the contaminated laden air enters through the bottom grill and air is pre-filtered from larger particulates. At stage II, it is made to pass through the multiple beds of DRISORBTM chemical filters. The corrosive gases are captured and neutralised in the filter by an adsorption and chemisorption process. At stage III, air is filtered again to remove sub-micron particulates. Eventually, the clean air is released from the top.
Bry-Air purification systems remove both corrosive gases and contaminants from the air and supply air free of contaminant gases to the controlled environment. It also reduces energy consumption because of very low-pressure drop over traditional media and aids to meet ANSI/ISA-71.04-2013 standard in critical control rooms.
|
Model
|
Air Flow
|
ESP
|
Motor
|
Power Required
|
Total Weight
|
|
|
CMH
|
CFM
|
Pa
|
KW
|
VAC/Φ/Hz
|
Kg
|
|
|
CAP-500-2
|
850
|
500
|
250
|
0.75
|
415/3/50
|
165
|
|
CAP-500-4
|
850
|
500
|
250
|
1.12
|
415/3/50
|
180
|
|
CAP-1000-2
|
1700
|
1000
|
250
|
1.12
|
415/3/50
|
205
|
|
CAP-1000-4
|
1700
|
1000
|
250
|
1.5
|
415/3/50
|
225
|
|
CAP-1500-2
|
2550
|
1500
|
250
|
2.24
|
415/3/50
|
260
|
|
CAP-1500-4
|
2550
|
1500
|
250
|
3.73
|
415/3/50
|
290
|
|
CAP-2000-2
|
3400
|
2000
|
250
|
3.73
|
415/3/50
|
320
|
|
CAP-2000-4
|
3400
|
2000
|
250
|
3.73
|
415/3/50
|
360
|
Standard variants of Bry-Air Control Room Air Purifier are available in 850-3400 CMH (500-2000 CFM) which can be customised based on the requirement.
Yes, you can replace the filters of the Bry-Air Control Room Air Purifier. Filters are designed to be replaced when needed. Regular filter replacement is important to maintain the efficiency and effectiveness of the gas phase filtration system, ensuring it continues to provide clean and contaminant-free air to your critical control rooms.
Bry-Air Control Room Air Purifier is effective in eliminating large amount of corrosive gases within an enclosed space. It is widely used in the control rooms of various plants, where large amounts of corrosive gases are generated, such as fertiliser and chemical plants, pulp and paper plants, and oil and refineries.
