Our Airgineers Can Help You Select The Right Product!
Contact Us
Approximately 94% of the electrical energy used by an industrial air compressor is converted into heat during compression, including losses through radiation. The remaining 6% stays in the compressed air itself. That’s why there is such a large opportunity to harness the waste energy.
The heat can be tapped with an industrial heat recovery system that captures it as low-grade heat. The system generates warm water, which can then serve as a driving energy source for adsorption chillers.
A properly designed screw air compressor heat recovery unit can recover anywhere from 60–94% of the available thermal energy as low-grade heat. That heat is used to generate warm water.
The chiller produces chilled water at 7°C for air conditioning or process cooling. It saves electrical energy, cuts CO₂ emissions, and reduces plant running costs. A waste heat recovery air compressor setup typically pays back in 2.5–4 years, depending on the hours of usage and the size of the compressor.
For an oil injected screw compressor rated at 110 kW, the recoverable energy is about 99 kW, giving a cooling potential of 12.0 TR. A 315 kW unit offers 284 kW of recoverable energy and 40.0 TR. Bry-Air’s sizing table lists the full range from 75–315 kW, and all figures are tentative.
They use potable water as the refrigerant, giving zero ozone depletion and next to no global warming potential. They run under vacuum with minimal moving parts, so operation is quiet and vibration-free. The silica gel adsorbent doesn’t need replacing, there are no crystallisation, corrosion, hazardous leak, or chemical disposal issues, and the operating life is a minimum of 25 years.
Our Airgineers Can Help You Select The Right Product!
Contact Us
Let's
Get In
Touch