Atmospheric Corrosivity Monitor
Realtime atmospheric corrosion severity diagnosis as per ANSI/ISA-71.04-2013
Our Airgineers Can Help You Select The Right Product!
Contact Us
Realtime atmospheric corrosion severity diagnosis as per ANSI/ISA-71.04-2013
Our Airgineers Can Help You Select The Right Product!
Contact Us
Real-Time Corrosion Monitoring
Quantitative Corrosion Assessment
User-Friendly and Robust Design
Long Sensor Life
When the minutest layer of corrosion builds up on the circuit surfaces of electronic systems at data centres, server rooms, control rooms, it aggravates electrical resistance and decrements equipment performance. Thus, installation of corrosion monitoring device is recommended to ensure early detection of corrosion potential, which can improve electrical systems performance.
Atmospheric Corrosivity Monitor provides qualitative and quantitative details of the overall corrosion potential of an environment (room) through copper and silver sensors.
It also measures and monitors the room temperature, relative humidity and the differential pressure (optional). It is based on Quartz Crystal Microbalance (QCM) technology. It measures the weight gain as a consequence of corrosion built up on the copper and silver plated sensors surfaces. The weight gain is translated to film thickness and the corresponding corrosivity classification level. The measurements are extrapolated in 24 hours for 30 days to know the severity level as per ISA standards.
Bry-Air Atmospheric Corrosivity Monitor diagnoses the corrosion of an environment according to the ANSI/ISA-71.04-2013 outlining the severity of corrosion from G1 (mild) to Gx (severe) environment. Reactivity monitoring can be used to characterise the destructive potential of an environment. Measurement of the thickness of corrosion film provides an excellent indication of the type(s) and level(s) of all corrosive gases present in the local environment.
Often it is seen that the environmental threats posed by fire, power, temperature, humidity and airborne particulates have long been recognized and successfully addressed in the server-room environment, but the corrosive potential of the air has been largely ignored. Even extremely low levels of contaminant gases at the ppb level corrode and damage the sensitive electronic cards in your servers. Excessive corrosion often leads to electronics warranty non-compliance, circuit board failure, ghost signalling, and even complete failure of electronics components.
Environments with higher atmospheric and air contamination require greater attention to air quality management. The interactive result of temperature variations and humidity with the gaseous contaminants has the potential to increase the threat of air corrosion, providing greater reasons for close monitoring of the immediate environment of IT infrastructure. All companies dealing with sensitive IT infrastructure such as data centres, server rooms, and control rooms, as a core part of their operations, need to implement a comprehensive checking and monitoring mechanism for the corrosion potential of the gases inside their facility. The ISA standards define or characterise environments in terms of their overall corrosion potential.
Based on the proven Quartz Crystal Microbalance (QCM) technology in which frequency output changes due to changes in weight. The stable digital output is not prone to drifts or errors and can be easily processed. The unit utilises copper and silver-coated quartz crystal microbalances and monitors the weight gain as a consequence of corrosion built up on the metal surfaces. The weight gain is translated to film thickness and the corresponding corrosion classification level.
ACM model BCM232 monitors the overall reactivity levels of gaseous airborne contaminants present. Reactivity Monitoring provides an exact and dependable way to evaluate the corrosivity potential of indoor air and also the effectiveness of installed filter systems.
|
Model
|
BCM 232
|
|
Material
|
Aluminium with powder coated
|
|
Accuracy
|
Within +/- 0.5-1% of full span
|
|
Power Output – Signal Analog
|
4-20 mA
|
|
Power Input – Operation Voltage
|
18-36V DC
|
|
Sensor life
|
4000 Å each
|
|
Dimension (LxWxH) in cm3
|
26 x 12 x 9 cm3
|
|
Weight
|
< 1000 gm
|
|
Logger Time, Interval of Sampling
|
Starts from 2 min to 120 min
|
Atmospheric Corrosivity Monitor helps in monitoring the following:
Model Material Accuracy Power Output – signal Analog Power input – Operation Voltage Sensor life Dimension (LxWxH) in cm Weight Logger time, Interval of Sampling BCM 232 Aluminium with powder coated Within +/- 0.5-1% of full span 4-20 mA 18-36V DC 4000 Å each 3 26 x 12 x 9 cm < 1000 gm Starts from 2 min to 120 min.
Atmospheric Corrosivity Monitor enables measurement of the corrosion potential of an enclosed environment with ease and accuracy on a real-time basis. It is used across various industries that include:
Atmospheric Corrosivity Monitor (ACM) measure the corrosion potential of an enclosed environment with ease and accuracy on a real-time basis. It also measures and monitors the room temperature, relative humidity and optionally, the differential pressure.
Atmospheric Corrosivity Monitor measure the corrosion potential of an enclosed space through copper and silver sensors. It is based on Quartz Crystal Microbalance (QCM) technology, which measures the rate of increase of corroded metal sensor mass. The measurements are extrapolated in 24 hours for 30 days to know the severity level as per ANSI/ISA 71.04-2013 standard.
Atmospheric Corrosivity Monitor provides real-time monitoring and early detection of environmental corrosivity, allowing for proactive measures to prevent equipment damage and failures. It can also provide real-time information on room temperature, relative humidity and differential pressure.
Like any monitoring system, the Atmospheric Corrosivity Monitor requires regular maintenance, including sensor calibration and replacement, to ensure accurate and reliable measurements. Also, it provides the result on the basis of airflow in 24 hrs, which might give a fault result due to the absence of any contaminants or corrosive gases on that day.
