Don't let Breakdowns in your Electronic Controls stop your Process flow !

Ensure reliability. Eliminate downtime.

Traces of corrosive gases like Chlorine, Sulphur Dioxide/Trioxide, Hydrogen Sulphide, Nitric Oxide, Mercaptans, Aldehydes, Arsine, Ammonia, Volatile Organic Compounds, etc . produced during the manufacturing process slowly corrode electronics and sensitve electronic components of control panels and sensors, resulting in malfunctions, breakdown and downtime.

The solution !!

Bry-Air’s ‘state-of-the-art’ Air and Gas Purification System, provides gaseous filtration - a simple and cost-effective solution.
The ultimate solution to corrosion lies in gaseous filtration, which involves passing the contaminant laden air stream through a bed of dry media placed in a properly designed housing.
The principle of air purification is simple : the contaminated air passes through pre-filters which retain dust and particles,

and then the required chemical media stages (combination of activated carbon and activated alumina impregnated with proprietary chemicals) which chemically destroy any remaining gaseous contaminants. It is a simple, yet cost-effective solution to a problem that can be very costly from a production standpoint.
Besides, a complete line of gaseous filtration products ranging from filter media to adsorber housing, Bry-Air offers the latest technology in gaseous adsorption such as the Ammonia-Gas Phase Activated Carbon process which greatly increases the adsorption capacities of activated carbon.

Process industries can prevent downtime

caused by corrosion / break-downs in control rooms by installing a Bry-Air EcoScrub Air & Gas Purification System (AGP). The Bry-Air AGP removes the corrosive gases by a process of Adsorption and Chemisorption using Brysorb impregnated media.

Why do you need to protect your control rooms ?

Studies have shown that atmospheres which produce corrosion rates greater than 0.1 microns per year cause unacceptable number of corrosion-related failures of micro-circuitry.


Corrosion Rate per year
VS.
Equipment Failure

(in micro-circuitry)
<0.1 : No failures found
>0.1 : Intermittent failures in 1-2 years
>0.4 : Inoperative in 2-4 years
>0.6 : Intermittent failures in 0.5-1 years
>0.2 : Inoperative in 0.25-0.5 years

  • For electronic equipment, corrosion rate has to be below 0.1 micron per year.
  • For electrical equipment, the same can be as high as 0.5 micron per year.

(1 micron = 0.001 mm)

Process Industries which can benefit

Cement Rubber Chemicals
Paper & Pulp Semiconductors
Refineries & Petrochemicals
Battery Food Processing
Paint Aluminium
Fertilizer Steel

and then the required chemical media stages (combination of activated carbon and activated alumina impregnated with proprietary chemicals) which chemically destroy any remaining gaseous contaminants. It is a simple, yet cost-effective solution to a problem that can be very costly from a production standpoint.
Besides, a complete line of gaseous filtration products ranging from filter media to adsorber housing, Bry-Air offers the latest technology in gaseous adsorption such as the Ammonia-Gas Phase Activated Carbon process which greatly increases the adsorption capacities of activated carbon.

Process industries can prevent downtime

caused by corrosion / break-downs in control rooms by installing a Bry-Air EcoScrub Air & Gas Purification System (AGP). The Bry-Air AGP removes the corrosive gases by a process of Adsorption and Chemisorption using Brysorb impregnated media.