Centralised Conveying Sytems
The Bry Air Conveying system advantage is in it being a one-stop shop. This ensures no spillage, no material wastage, right material for the right machine at the right time and quick change over of material. This results in continuous feed of material and thus an accident free shop floor.
The BCS series comes with
All the parts in contact with material is made of SS304.
The Integrated Proximity Sensor activates material demand. The special dump valve design mounted on a bearing allows smooth movement of dump valve's blanking disc and closing during the conveying process.
The SS Mesh Filter of 530 micron separates the resin from the air. There is a Vacuum Break Valve for automated mesh filter cleaning and quick evacuation. Specially designed material entry creates 'cyclonic effect' to save filter mesh from damage.
The special flapper with a long life silicone seals at mesh filter, load valve and dump valve for leak proof vacuum. This allows receiver usage at higher temperatures.
The special flapper also served the purpose of deflecting incoming material away from the screen.
The Access Door allows servicing & inspection of dump valve assembly without any tools. The receiver comes with a highly effective magnet and a clearly visible tower light for status of operation and fault. The Receiver comes in capacities of 6 liters, 15 liters, 30 liters, 60liters, 75 liters.
Regenerative Vacuum Pump Station
The brushless regenerative pumps are noiseless and low in maintenance. They provide powerful vacuum to convey free flowing pellets and regrind.
Every unit is fully assembled and permanently lubricated to deliver optimum vacuum and is consolidated on a compact frame.
The optional discharge selection valve allows exhaust air to be recycled back to the closed loop dry air system, or discharged to the atmosphere.
Specially designed by-pass valve with silencer, which allows pump to run on past system demand for prevention of rapid start/ stop cycles and pump over heating.
Safety relief valve and vacuum gauge to provide safety to the pump during certain unavoidable circumstances.
State-of-the art microprocessor controlled pump safety system which indicates voltage, current, frequency, load bar graph and a fault display of over load, under voltage, over voltage, phase sequence reversal & failure.
Central Dust Collector
A CRC powder Coated Self Standing Chamber that can be located anywhere between the pump and conveying system.
The central dust collector protects the pump and reduces filter maintenance by collecting fines and dust.
The separated dust and fines collected are easily cleaned and the sight glass in the chamber provides view for inspection.
Touch Screen Color Display & Management Password Protected Data Entry System.
Independent controller for each receiver. Clear functional colour display of each receiver and regenerative vacuum pump station.
Possible to program load time, dump time and regrind in % conveying time with respect to source in case of usage of Vacuum take off box(p) & Regenerative Vaccum Pump Station Seek Time.
Audio Visual warning alarm with message that conveys shortage, material not conveyed for long, receiver waiting for material and regenerative vacuum power unit tripped.
RVPS Isolator switch off and emergency switch off. Alert message for cleaning the filter. The occurrence of it is programmable.
Enter Bry-Air Exit Moisture