HOW DOES IT WORK?

The moisture laden air enters through the process inlet and passes through the desiccant rotor, where the moisture is absorbed by the desiccant. The dry, dehumidified air is than delivered to conditioned area through the process outlet.

The rotor then rotates to the reactivation sector and the moisture is removed from the desiccant rotor, by blowing hot air through the reactivation outlet to the atmosphere. The hot desiccant rotor is cooled by a small portion of the process air before rotating back to the process sector. Thus, the adsorption process is continuous.

CNC fabricated with powder coated finish, the Bry-Air FVB can be packaged with

         * Pre/after cooling
         * by pass ducting and
         * mixing chambers

Volume controls, filter elements, etc. for complete environment control in a single package for any application.

At the heart of it

The EcoDry Dehumidifying Rotors are the result of many man-years of in-depth study and research on countless permutations and combinations of substrates, desiccants and chemical processes. Every parameter has been considered to maximize performance, durability and applicability.

Advatange with inside

• Adsorbent, non-toxic, non-flammable, fully water washable.
• In-situ synthesized metal silicate desiccant on an inert inorganic fibre substrate.
• Active desiccant 80% of the media weight, so as to ensure high performance and minimal heat carry-over.
• Rotor is non-flammable. The net organics in the honeycomb media less than 2%.
• Special edge hardened media surface to ensure a smooth surface and long life of both, media and the seal contacting it.
• Rotor perimeter flange extend media and seal life.
• Rotor incorporates robust internal structure with perimeter flange for industrial quality, durability and easy serviceability.
  

  Bry-Smart Dehumidifier Digital Control