|
Airtreatment–Industrial (Dehumidification
and Environmental Control) :
• Desiccant Dehumidifiers
• Air & Gas Purification Systems
• Heat Pipe Heat Exchangers (HPHE)
• Product Dryers
• Preservation Systems
• Climatic Chambers
Desiccant Dehumidifiers
Bry-Air Dehumidifiers offer the simplest and most economical solution
to humidity control.
The Bry-Air Chemical Dehumidifier can maintain RH as low 1% or even
lower at a constant level, regardless of ambient condition during
production/processing, storage and packaging.
Bry-Air has specialised in custom designed dehumidifying and environmental
control equipment for more than 30 years. Compact as well as custom
designed, special units can be engineered by experts at Bry-Air.
Problem of any size, massive or small, can be addressed by the Bry-Air
Dehumidifiers.
Air & Gas Purification Systems
The cost-effective way to protect electronic equipment from corrosion,
odour control and personnel protection from toxic gases. Acidic
gases emitted during various industrial processes, combine with
the moisture and humidity in the air to form electrolytes that corrode
electronic equipment and components. This leads to breakdowns, malfunctioning
and high maintenance expenditure, resulting in losses.
Heat Pipe Heat Exchangers (HPHE)
The Bry-Air Heat Pipe Heat Exchangers are suitable for air-to-air
heat recovery for a temperature range of -50°F (-45.66°C)
to + 500°F (260°C). With special materials of construction
for the tube, the exchanger can be designed to extend the range
to 800°F (426.66°C) to 900°F (482.22°C).
They can recover up to 75% of exhausted thermal energy. However,
under ideal conditions the thermal efficiency of an economic system
ranges between 55 to 70% and saves millions of BTUs year after year.
Product Dryers
Bry-Air has developed specialised Product Dryers for Seed, Wood
and many other products in response to market needs.
Preservation Systems, etc.
Bry-Air designs and manufactures customized Preservation Systems
for Industry/ Military storage.
The Flexible Barrier Storage (FBS) Systems preserves hard stores
–mobile and immobile, in sheds or on-site ,and maintain defence
systems and equipment in state of constant readiness.
Climatic Chambers
Arctic India Sales also markets climatic
chambers, test chambers, burn-in chambers, thermostatic chambers,
to name just a few which find wide application in R & D centres,
automobile industry, telecommunications electronics, etc.
Airtreatment–Commercial: Fresh
Air Treatment Range
• Heat Recovery Wheels (HRWs)
• Energy Recovery Ventilators (ERVs)
• Treated Fresh Air Units (TFAs)
• Evaporative Cooling Pads (ECPs)
• Heat Extractors/Control Panel Coolers (HEX)
Heat Recovery Wheels (HRWs)
The EcoFreshTM Heat Recovery Wheel (HRW)
recovers total energy, sensible as well as latent, and meets all
the requirements of Indoor Air Quality (IAQ), Humidity Control and
Energy Savings. Incorporation of EcoFresh Heat Wheels into the airconditioning
systems mean more outdoor air at lower energy cost .
Energy Recovery Ventilators(ERVs)
The EcoFreshTM Energy Recovery Ventilators (ERVs) help to meet ASHRAE
62.1.199 specified ventilation rates without increasing air conditioning
tonnage.
It exhausts the stale, contaminated conditioned room air and exchanges
it with fresh outdoor air, recovering up to 80% of the energy from
the exhaust air stream in the process.
Treated Fresh Air Units (TFAs)
The EcoFreshTM Treated Fresh Air Units (TFAs) incorporating energy
recovery basically comes in two (2) types of systems;
• FLEXOPAC and FLEXOMAX …… Unitary Block Units
• FLEXOMIX ….. Modular Units
The EcoFreshTM TFAs, series FLEXOPAC and FLEXOMAX, permits effective
and energy-efficient fresh air treatment and conditioning in varying
environments such offices, workshops, homes and schools.
Evaporative Cooling Pads(ECPs)
Ecocool Evaporative Cooling Pads, manufactured by Arctic India Engineering
are available in both 5mm and 7 mm flutes and can be customized
for sizes and flute angles. Ecocool has many outstanding features
,viz., a high structural strength , high wettability, extremely
low pressure drops and negligibly small edge buildup.
Heat Extractors/Control Panel Coolers (HEX)
The Heat Extractors/Control Panel Coolers (HEX) is a heatpipe based
air-to-air heat exchanger which allows for maintenance free cooling
of Control Panels.
Plastic Auxiliaries (PDE)
Bry-Air has evolved into a “Single Source” for all your
plastics auxiliaries, recognizing the need to organize auxiliary
equipment to support your processing machines.
• l Plastics Dryers
• Conveying Systems
• Dosers and Blenders
• Temperature Control
• Mould Dehumidification Systems
Plastics Dryers
Bry-Air manufactures a large range of Dehumidifying Plastics Resin
Dryers for Hygroscopic Resins as well as Hot Air Type Dryers for
drying Non-Hygroscopic Resins.
Conveying Systems
Material conveying systems are an integral part of most plastic
processing operations. From a single loader ..auto loader…to
a plant-wide loading system…Centralised Conveying Systems ,
Bry-Air delivers the most advanced system in advanced material handling/conveying
technology.
Dosers & Blenders
Bry-Air provides the most cost effective volumetric dosers as well
as highly accurate gravimetric blenders which allows the processor
the choice to select the equipment suited to his processing need
and budget.
Temperature Control Equipment
Bry-Air offers a range of oil and water based Mould Temperature
Controllers and Chillers which allows the processor to choose the
temperature control suited to his process.
Mould Dehumidification Systems
Bry-Air EcoDry Dehumidification Systems-MDS Series is designed exclusively
to prevent mould sweating. The Bry-Air Mould Dehumidification System
ensures increased production through reduced cycle times.
Compressed Air Dryers
Delair is a leading brand in Compressed Air Dryers and has a wide
range of Refrigeration Type as well as Adsorption type Compressed
Air Dryers.
|