APPLICATION: Vintage Car Preservation FFPs - Frequently Faced Problems Like all 'Metal' Equipment, expensive vintage cars begin to rust and corrode due to moisture present in the air. Moisture accelerates the rate of corrosion leading to Deterioration of parts and components Spoils exterior finish of cars Decrease in life General Recommendation : Relative Humidity in Car Storage Areas should be maintained at 45% RH and temperature at 24° C (75°F) Our Solution : Preservation of Sultan of Brunei's Vintage Cars Maintaining a fleet of 398 cars with Porches, Rolls Royce, Ferraris and Mercedes and several antique and vintage models is no small task even for the royal family of Brunei. Keeping all the beauties in gleaming condition and purring and ready to go at the touch of a key required extensive maintenance and upkeep by a large staff. But, all the king's men and all the king's staff could not keep the moisture menace away. The Solution Bry-Air offered a simple and most economical solution. Four Desiccant Dehumidifiers model MVB-15-BE were put to work to dehumidify the entire storage block housing the cars. A temperature of 24° C (75°F) and 45% Relative Humidity helped keep the cars in perfect condition, free from rust, needing minimum maintenance and upkeep. Bry-Air dehumidifiers are able to meet these stringent conditions since they are capable of maintaining RH as low as 1% or even lower at a constant level, regardless of ambient conditions. Bry-Air has a wide experience of combating the moisture menace. It provides the most cost effective solution for preservation of metal and other hardware from corrosion in industrial storage, commercial and defence sectors.