Moisture/ Humidity control for Seed drying and Seed Storage
A variety of seeds are commonly stored for consumption or processing in future. The primary concern in such storage is to protect the seed from damage by fire, water, insects and rodents. However, seeds must also be preserved for sowing at a later date or for genetic experiments. When stored for such purposes, the seeds must also be protected from loss in germination potential
Importance of Seed drying and storage
Due to improper drying and storage conditions, seeds suffer from major retarding effects. These are:
Therefore, seed conservation through efficient processing and storage becomes factor of prime importance. Proper drying limits the subsequent rate of seed deterioration during long term storage.
Three important factors determine the shelf-life of seeds:
Purpose of Seed Storage
After the seeds are dried, the next phase is their safe storage. Safe storage of seeds is important for a variety of reasons. Obviously, seeds must be preserved for use as human and animal food, and for planting. Seed viability must also be protected (germplasm, protection) for various uses by the plant scientist who maintains a permanent reservoir of seed stock by establishing a seed bank.
Seed storage is the maintenance of high seed germination and vigour from harvest until planting. The purpose of seed storage is to maintain the seed in good physical and physiological condition from the time they are harvested until the time they are planted. Seeds have to be stored, of course, because there is usually a period of time between harvest and planting. During this period, the seed have to be kept somewhere. While the time interval between harvest and planting is the basic reason for storing seed.
Seed suppliers are not always able to market all the seed they produce during the following planting season. In many cases, the unsold seed are 'carried over' in storage for marketing during the second planting season after harvest. Problems arise in connection with carryover storage of seed because some kinds varieties and lots of seed do not carryover very well.
Optimal Seed Storage conditions
Storage conditions depend on seed projected use. Seed Storage has certain requirements which include protection from water, contamination, rodents, fungi etc. Additionally, controlling relative humidity and seed storage temperature is vital. The two are interrelated. Interestingly, for short term storage, their relationship can be expressed by a simple rule of thumb. Storage temperature (in °F) plus relative humidity should total 100.
For achieving the controlled air requirement, refrigeration, offer a direct, simple and economic solution to control both temperature and relative humidity to the specified level.
Bry-Air Dehumidifiers for moisture removal and humidity control, in conjunction with refrigeration equipment for sensible cooling and temperature control, are being used extensively by leading seed processors worldwide. Thus, preserving the basic element of nature, the perpetuator of life ... SEED.
Seed Drying Conditions
The amount of moisture present in the seeds affects both the quality and storability of the seeds during long term storage. Generally, drying seeds to 4-6% moisture content on wet basis decelerates the rate of seed deterioration exorbitantly.
Seed Drying using the Dehumidification principle
Seeds cannot be dried by exposing them to heated air as elevated temperatures will destroy their germination potential. The alternative applied is to release the moisture from the product to the surrounding air. The dryer by maintaining the air at a lower moisture level can increase the drying rate. Moreover it removes the variability of weather as a factor in a drying operation.
Bry-Air Seed Dryer
The dehumidifying seed dryer uses the following principle. The seed dryer essentially consists of two parts: the first is a chamber fitted with perforated trays vary with the quantity of seeds to be dried and also the size of the equipments.
On top is housed the second part- the dehumidifying dryer, which continuously feeds dry air into the chambers. The removal of moisture is based on the principle of physical adsorption. Through experience, it is found that to optimise drying capacity with minimum power consumption and to retain germination potential in the seed, the air coming out from the dry chamber should be at a temperature of 100°F+5%RH.
These seed dryers are based on state-of-the-art technology and incorporate a unique air distribution pattern through the trayers to optimize drying capacity and time.
Some of our Clients: